Photos and Description by Lindsay Dye Engine 28 began service with Haslet (TX) Fire Rescue on November 10, 2018. The rig is built on a Pierce Velocity cab and chassis with seating for 6 and a rear-facing EMS cabinet mounted on the left side wall of the cab. Exterior...
Toyne Builds Custom Pumper-Tanker, Quick Attack for the Storm Lake (IA) Fire Department
By Alan M. Petrillo The Storm Lake (IA) Fire Department, a combination agency with a paid full time chief, one paid full time firefighter, and 31 volunteer firefighters, was considering the need to replace two older fire apparatus. The first was a 1981 General...
“Safe Cab” Trade-Offs
By Bill Adams At the FDIC International 2019, several apparatus manufacturers addressed both physical and gaseous carcinogens in crew cabs. Noteworthy were introductions in compartmentation by both REV’s E-ONE and Rosenbauer-America. I am totally in favor of...
2019 Pierce Velocity Pumper for Dallas (TX) Fire-Rescue
Photos and Description by Lindsay Dye In 2018, Dallas Fire-Rescue began a relationship with Pierce to be the apparatus provider for the city. As engines, trucks and heavy rescue units come up for...
Brighton (CO) Fire Rescue District Fleet Maintenance
https://youtu.be/PKsTpcT77bc More than 50 vehicles keep Brighton (CO) Fire Rescue District mechanics Doug and Scott busy. See how they manage the large fleet, plus take a look inside the District's new Fleet Maintenance Facility. Related The Rig: Thinking About...
Marion Builds Enclosed Top-Mount Pumper for Wisconsin Department
...
L-Tank Weight Considerations
By Bill Adams Pundits and commentators expound on the firematic benefits of using L-shaped booster tanks on pumpers. Apparatus manufacturers (OEMs) promote rigs with “New York City style” low hosebeds. (See Apparatus Purchasing: FDNY-Style Hosebeds,...
Rig Logos At FDIC International 2019
FDIC International is a great place to see what departments across the country are building into their new rigs. It gives attendees a sampling from manufacturers located across the country, and most attendees...
Turning Radius and Tapered Bumpers
By Bill Adams All the purchasing specification said was, “The bumper shall be 95 inches wide with 45-degree corners and side plates.” Unless the reader is the preferred dealer who wrote the document, that statement has little to no intrinsic value. It’s possible the...
Natchitoches (LA) Fire Department Ferrara Commercial Pumper
Type Commercial Pumper Chassis Freightliner Body Extruded Aluminum Body Pump Side-mount 1,500-gpm Waterous CSU Pump Foam Foam Pro 2002, 200-gallon tank Tank 750-gallon water tank More...
Ferrara Fire Apparatus Custom Pumper Goes to the Ramsey (IN) Volunteer Fire Department
By Alan M. Petrillo The Ramsey (IN) Volunteer Fire Department covers 113 square miles of fire district through four fire stations, each housing an engine, tanker, and brush truck and staffed by 34 volunteer firefighters. The department, which has a total of 19...
Gallery: 2018 Ferrara Cinder Pumper
Photos and description by Lindsay Dye Engine 1 began service on March 16, 2018, with the Lowry Crossing (TX) Volunteer Fire Department. The rig is built on a Ferrara Cinder cab and chassis with an 8-inch...