Ferrara

Ferrara Fire Apparatus built this Super Pumper for Equilon Enterprises LLC Shell Convent Refining on a Inferno chassis and XMFD four-door cab with an 8-inch raised roof that's set up to seat six firefighters.

The New Albany Township (IN) Fire Department had Ferrara Fire Apparatus build this Cinder HD-77 rear-mount aerial quint that has an extended cab with an 8-inch notched raised roof, and seating for six firefighters.

Type Commercial Pumper   Chassis Freightliner   Body Extruded Aluminum Body   Pump Side-mount 1,500-gpm Waterous CSU Pump   Foam Foam Pro 2002, 200-gallon tank   Tank 750-gallon water tank   More information: https://www.ferrarafire.com/trucks/6487/

HOLDEN, LA—Ferrara, a subsidiary of REV Group and a manufacturer of fire apparatus, will debut the Skippack (PA) Fire Company’s 107-foot MVP Rescue Ladder at FDIC International in Indianapolis, IN, April 11th-13th, 2019. The new 107-foot Rescue Ladder is the ...

By Alan M. Petrillo The Ramsey (IN) Volunteer Fire Department covers 113 square miles of fire district through four fire stations, each housing an engine, tanker, and brush truck and staffed by 34 volunteer firefighters. The department, which has a ...

Photos and description by Lindsay Dye Engine 1 began service on March 16, 2018, with the Lowry Crossing (TX) Volunteer Fire Department. The rig is built on a Ferrara Cinder cab and chassis with an 8-inch raised roof. Seating for ...

By Alan M. Petrillo The Skippack (PA) Fire Company runs to a lot of motor vehicle accidents where it sends its heavy rescue, backed up by a pumper in case water has to be flowed. But, the process means that ...

Enjoy looking back on the top five posts of 2018 from “The Rig.”   Miami-Dade (FL) Fire Rescue Department Taking Delivery of Six Clean Cab Concept Rescue-Pumpers The Rig: It’s the Little Things Gallery: Rigs on the Show Floor at ...

TYPE Custom Pumper CHASSIS Igniter BODY Extruded Aluminum Body PUMP Side Mount – Hale Qflo 1,250-gpm FOAM Foam Pro 2002, 20-gallon foam cell TANK 1,000-gallon water

TYPE HD-107 Ladder CHASSIS Inferno BODY Extruded Aluminum Body AERIAL 4-section rear mount aerial ladder; 107 vertical reach at 72 degrees PUMP Rear-Mount – Hale QMAX 1500 GPM FOAM FoamPro 2001, 20-gallon foam cell TANK 400-gallon More information available at ...